Thursday, 9 September 2010

Lavor PWH 2.0 hot water pressure washer - SALE NOW ON

ONLY £999+vat! - BE QUICK!
Click here; Lavor PWH 2.0 Hot water high-pressure cleaner



• Three ceramic coated pistons, brass axial pump head with built-in by-pass valve

• Suction and delivery S/S valve

• Vertical burner with high thermal efficiency steel coil

• Safety valve

• Temperature regulation gauge

• Glycerine pressure gauge

• LSP: Late Shut down Protection 24V

• Quick connection joint gun/hose

• Adjustable detergent delivery built-in tank for indirect suction

• Two ways fuel pump

• Ergonomic handles and impact resistant covers

• Accessory holder

• Power cable (m 5)



Operating pressure 30-100bar

Delivery rate 330-660 l/h

Max water temperature 140°C

Absorbed. power 2800 W

Voltage 240V-50Hz

Machine dimensions/weight: 94x65x90cm / 97 Kg



Includes:

• Professional gun

• High pressure hose 8m

• High/low pressure lance with adjustable head and nozzle

• Brass connection for inlet water

• High pressure nozzle

• Quick connection for H.P. hose.



Made in Italy - the home of high quality pressure washers


12 months return to base warranty

The Lavor PWH 2.0 Hot water pressure washer is a professional grade hot water pressure washer ideal for washing tractors, HGVs, car or van fleets etc.

For all your tools and powertools visit http://www.toolsandpowertools.co.uk/

Hyundai generators

Genpower Ltd - UK importer for Hyundai and Evopower power equipment

Friday, 3 September 2010

Hyundai Inverter generators - quick start guide


Hyundai HY1000SI, HY2000SI & HY3000SI
Quick start up guide
1. Fill petrol tank with straight unleaded petrol –(no premix with oil in petrol). Be sure
to use new petrol, as old petrol deteriorates over time.
2. Fill engine with SAE10w30 or 15w40 engine oil up to the top of the oil filler neck,
replace dipstick.
3. Switch both switches on control panel to ON.
4. Switch petrol tap to ON.
5. Push choke lever to start position (IMPORTANT: On HY1000SI this is to the
RIGHT. On HY2000SI & HY3000SI this is to the LEFT). The choke should be used
when the machine is hot or cold.
6. When starting with a new machine, or if it has run out of petrol: HY2000SI &
HY3000SI, push primer bulb fully in 30+ times to prime the carburettor. HY1000SI,
if starting from empty fuel tank, gently pull pullstart handle 10-20 times to prime the
carburettor. On all machines, you will see the petrol being pumped through the
clear in-line filter, continue pumping until the carburettor bowl is full of petrol.
7. If the fuel tank is full of petrol, on HY2000SI & HY3000SI, push primer bulb 5
times.
8. Pull pullstart handle quickly – the generator should start easily if the above
procedure has been followed.
9. After engine has started, push choke lever back to run position.
Warning – take care when fitting side cover as damage to choke lever may occur

For pdf download of Hyundai Leisure generator quick start guide, click here.

Hyundai Leisure generator manual, click here.

Lavor Hot Water Pressure Washer - Hot Tech

The New lavor Hot Tech is a very compact machine, producing upto 90 degrees of hot water at 2150psi.
The hot water pressure washer weighs in at just 45kg and with it's two wheels and convenient handle, can be easily moved around.
The 2300w motor drives the Italian high pressure pump, giving upto 2150psi. The pressure washer comes with 5m of high pressure hose, 5m 13amp supply lead, variable fan lance, foam applicator, built in diesel tank for the heating unit, hose adaptor and full instructions.

This is a high quality Italian made pressure washer, with a 12 months return to base warranty.

Lavor Hot Tech Hot water pressure washer

Or buy here: Lavor Hot Tech

Friday, 20 August 2010

Free Air Compressor - Enter NOW!



Win this Sealey Air Compressor





Just join our newsletter mailing list and you will be entered into our monthly prize draw to win some fantastic powertools.





Click here to add your email and enter the free draw:


http://www.toolsandpowertools.co.uk/compressors/direct-drive/oiled/sealey-sa2415-air-compressor-free-prize-draw/

Aluminium cylinder head with cast iron cylinder gives added resistance to wear.

Suitable for general-purpose workshop applications.

Pump head directly coupled to heavy-duty induction motor for reliable and quiet operation.

Welded tank complies with latest safety requirements.

Fitted with fully automatic pressure cut-out switch and twin gauges displaying tank and working pressures.

Fitted with ASTA/BS approved non-rewirable plug.

Model No. SA2415


Additional Information
Weight: 26kg
Model No: SA2415
Motor Output: 1.5hp
Voltage/Phase: 230V - 1ph
Input Current: 5A
Air Displacement: 6cfm
Tank Capacity: 24ltr
Maximum Pressure: 116psi/8bar
Voltage/Phase: 230V - 1ph
Maximum Free Air Delivery: 4.2cfm






http://www.toolsandpowertools.co.uk/ is a division of Genpower Ltd

Tuesday, 27 July 2010

X-Calibur Plasma Cutter - Special Offer

The New X-calibur 40Amp Plasma cutter is on special offer at http://www.toolsandpowertools.co.uk/

Check it out here: http://www.toolsandpowertools.co.uk/welding-and-cutting/spot-and-stud-welders/-/xcalibur-zxcut40p-plasma-cutter-110v-to-240v-single-phase/

The XCALIBUR CUT-40P utilises a Euro connector type torch with a 6m cable assembly for increased working range.

The unit has over current / overheat protection circuits and warning indicators for incorrect air pressure and torch problems.

The XCALIBUR CUT-40P is an IGBT inverter with digital control technology. Its design offers a wide range input voltage with automatic selection, so can be used with a 110v or 240v supply.
It comes complete with pilot arc start and grid cutting feature.

Specification:

Part No ZXCUT-40P
Input Voltage 110V AC 50/60Hz OR 230V AC 50/60Hz
Rated Input Power 3.44 kW 4.63 kW
Cutting Current Range 20-30A 20-40A
No Load Voltage 380V DC
Duty Cycle 30A @ 35% 40A @ 40%
Max.Thickness 15mm 20mm (Carbon Steel)
Quality Thickness 12mm 20mm (Carbon Steel)
Protection Class IP 23S
Dimensions mm 430 x 170 x 270
Weight Kg 12.6
FREE UK SHIPPING!

Monday, 26 July 2010

Hyundai Leisure generators Now in stock


Hyundai Leisure generators back in stock.

We now have the Hyundai HY1000Si, HY2000Si and HY3000Si back in stock.


These leisure generators are proving very popular with motorhome and caravan users, being ideal for keeping the battery charged up and powering TVs and computers etc.


The power output is a pure sine wave form, so it is safe to use with computers and sensitive electronic equipment.




Lavor PWH 2.0 Hot water pressure washer - NEW!

New from Lavor, the PWH 2.0 Hot water pressure washer / steam cleaner.

• Three ceramic coated pistons, brass axial pump head with built-in by-pass valve
• Suction and delivery S/S valve
• Vertical burner with high thermal efficiency steel coil
• Safety valve
• Temperature regulation gauge
• Glycerine pressure gauge
• LSP: Late Shut down Protection 24V
• Quick connection joint gun/hose
• Adjustable detergent delivery built-in tank for indirect suction
• Two ways fuel pump
• Ergonomic handles and impact resistant covers
• Accessory holder
• Power cable (m 5)

Operating pressure 30-100
Delivery rate 330-660 l/h
Max water temperature 140°C
Absorbed. power 2800 W
RPM 2800
Voltage 240V-50Hz
Machine dimensions/weight: 94x65x90cm / 97 Kg

Includes:
• Professional gun
• High pressure hose 8m
• High/low pressure lance with adjustable head and nozzle
• Brass connection for inlet water
• High pressure nozzle
• Quick connection for H.P. hose.

Fore more info - click here: http://www.toolsandpowertools.co.uk/environmental-and-janitorial/pressure-washers/electric/lavor-pwh-2.0-hot-pressure-washer-steam-cleaner150-bar-140-celcius/

Made in Italy - the home of high quality pressure washers

12 months return to base warranty

Sunday, 18 July 2010

www.toolsandpowertools.co.uk - tools buy now

Try out our easy shopping cart system- n need to register, just click Paypal or GoogleCheckout buttons.
www.toolsandpowertools.co.uk
For all your welding, welders, air compressors, pressure washers, workshoptools etc

www.toolsandpowertools.co.uk

New Tools and powertools website- http://www.toolsandpowertools.co.uk/ Over 10,000 tools available on line. We stock the following brands - Sealey, Hyundai, Fiac, Evopower, Cebora, Weldstar, Armorgard

Tuesday, 16 February 2010

www.toolshopwales.co.uk

Genpower have opened a new tool shop at their premises in Milford Haven. All types of power and hand tools are available to purchase on-line or collect from the store. The new website address is www.toolshopwales.co.uk

The new tool shop stocks a large range of Sealey tools, Hyundai Power Products - diesel and petrol generators and pressure washers, compactor plates, compressors, welders, battery chargers, socket sets, welding consumables, etc.
Call in to have a look round, or telephone 01646 66 38 48.